Risk Management Institute
The Risk Management Institute (RMI) at Midland College was created to offer courses on workers’ health and safety for employers, employees, and the general public. Every year since 2005, Texas Mutual Insurance Company has presented Midland College with a $100,000 grant with which to cover all expenses associated with these workplace safety courses, including supply cost and instructor salaries. |
Who Should Attend RMI Courses
- EHS/OSHA professionals
- Safety trainers/personnel
- Workplace managers and supervisors
- Physical Plant Directors
- Human Resources
- Small businesses
- All members of the workforce
*Minimum of five students required to conduct class. Pre-registration is required.
ONLY $25 SIGN-UP FEE
Spring 2020 Schedule Now Available
Registration starting January 3, 2020
Select From Categories below for Class Offerings
January 31 (Friday) 8:30 am - 12:30 pm
February 14 (Friday) 8:30 am - 12:30 pm
March 6 (Friday) 8:30 am - 12:30 pm
April 30 (Thursday) 8:30 am - 12:30 pm
May 21 (Thursday) 8:30 am - 12:30 pm
This course covers the steps needed for a thorough investigation of any incident including:
- Planning for emergency care of the injured
- Preserving the incident scene
- Talking to witnesses
- Root cause analysis of the incident
- Reporting the incident
- Follow up on the incident
- Implementing new procedures to prevent further incidents
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
January 30 (Thursday) 8:00 am – 5:00 pm
February 21 (Friday) 8:00 am – 5:00 pm
April 24 (Friday) 8:00 am – 5:00 pm
To contribute to the reduction of safety related incidents in the Pipeline industry by providing participants with the knowledge needed to identify hazards and risks, and understand practicing safe behavior in the workplace.
Provide a consistent approach to orienting new employees and introducing existing employees to the most up to date safety information in the Pipeline industry.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
January 31 (Friday) 8:00 am – 5:00 pm
February 27 (Thursday) 8:00 am – 5:00 pm
May 14 (Thursday) 8:00 am – 5:00 pm
Explores the information required for employees to recognize a permit required confined
spaces, identify hazards and how to protect against them, and understand all procedures
necessary to act as either an entrant, attendant or supervisor working in or around
a confined space.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
January 27-29 (Monday - Wednesday) 8:00 am - 5:00 pm
March 18-20 (Monday - Wednesday) 8:00 am - 5:00 pm
April 1-3 (Monday - Wednesday) 8:00 am - 5:00 pm
May 6-8 (Monday - Wednesday) 8:00 am - 5:00 pm
December 2-4 (Monday - Wednesday) 8:00 AM - 5:00 PM
Core Compliance is the C.O.R.E platform interface that is designed for use by a firms compliance team, external consultants and those with oversight responsibility. It provides an out-of-the-box solution that can be quickly and easily configured to implement compliance processes and information flows.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
January 23 (Thursday) 8:30 am - 12:30 pm
March 26 (Thursday) 8:30 am - 12:30 pm
April 30 (Thursday) 8:30 am - 12:30 pm
May 16 (Thursday) 8:30 am - 12:30 pm
A complete training on the principle areas needed to effectively perform cardiopulmonary resuscitation and perform basic first aid. This course also covers the use an automated external defibrillator and instructs in the protection of workers from blood-borne pathogens. Training includes hands-on exercises to develop and demonstrate the skills needed for CPR and first aid.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
February 13 (Thursday) 8:00 am - 4:00 pm
April 16 (Thursday) 8:00 am - 4:00 pm
A complete training on the principle areas needed to effectively perform cardiopulmonary
resuscitation and perform basic first aid. This course also covers the use an automated
external defibrillator and instructs in the protection of workers from blood-borne
pathogens. Training includes hands-on exercises to develop and demonstrate the skills
needed for medic First Aid Pediatric Plus.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
January 16 (Thursday) 8:00 am – 5:00 pm
March 6 (Friday) 8:00 am – 5:00 pm
What would happen if the Federal Motor Carrier Safety Administration came knocking
on your door requesting an audit? Are you ready? This course is designed to educate
the Motor Carrier on the regulations that apply to your company. Learn how to maintain
the proper records required. How to audit daily operation to see where the issues
may be and have a solution for continued improvement. After completion of this course
participants will have the knowledge and tools needed to start the process of make
improvements to current process. This course is for managers, safety personal, or
personnel who are responsible for DOT regulations.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
March 19 (Thursday) 8:30 am - 12:30 p.m
May 8 (Friday) 8:30 am - 12:30 p.m
Applicability of part 40 and part 49 of the Code of Federal Regulations as they apply to:
- DOT rules
- Effects of alcohol on employees
- Requisition of tests
- Record keeping
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
January 23 (Thursday) 8:00 am – 5:00 pm
March 27 (Friday) 8:00 am – 5:00 pm
This course explores the differences between excavation and trenching, the hazards of excavations, as well as the requirements for excavation permitting (company policy), completion of excavation permits and daily inspections.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
February 28 (Friday) 8:00 am - 5:00 pm
April 16 (Thursday) 8:00 am - 5:00 pm
Cultivates an understanding of fall hazards and the various ways to prevent injury,
as well as OSHA regulations required for fall protection. This course also, explores
the hazards of ladder use and the various ways to prevent fall injuries.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
No SPRING 2020 Classes
This course covers fire standards and regulations dealing with fire and electrical, the basics of fighting a fire and the ability to be safe while working with electricity, as well as the purpose and scope of the National Electric Safety Code (NESC).
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
January 17 (Friday) 8:30 am - 12:30 pm
March 5 (Thursday) 8:30 am - 12:30 pm
May 7 (Thursday) 8:30 am - 12:30 pm
Information and training for forklift operators including forklift design, controls and instrumentation, comprehensive pre-use inspection, forklift stability and factors affecting stability. The course includes hands-on training and demonstration of proficiency.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
February 27 (Thursday) 8:30 am - 12:30 pm
May 1 (Friday) 8:30 am - 12:30 pm
This course provides certification based on the ANSI and Railroad Commission requirements
for competent training needed by workers who may be exposed to concentrations of H2S.
The covers exposure limits, properties and physical characteristics of H2S, symptoms
of exposure, monitoring, and respiratory protections needed.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
February 6 (Thursday) 8:30 am - 12:30 pm
March 20 (Friday) 8:30 am - 12:30 pm
May 1 (Friday) 8:30 am - 12:30 pm
This course is based on the ANSI and Railroad Commission requirements for competent training needed by workers who may be exposed to concentrations of H2S. The covers exposure limits, properties and physical characteristics of H2S, symptoms of exposure, monitoring, and respiratory protections needed.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
No SPRING 2020 Classes
Course content includes defining health, physical and environmental hazards of chemicals, creating classification processes that use available data on chemicals for comparison with the defined hazard criteria, communicating hazard information, as well as protective measures on labels and Safety Data Sheets (SDS).
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
No SPRING 2020 Classes
A course in the transport of hazardous materials and dangerous goods to meet the requirements of the U.S. Department of Transportation Title 49 CFR, Sub Part H, Sections 172.700 - 172.704, commonly referred to as Docket HM - 126F. This docket sets the training requirements for employees and employers involved in all modes of transportation, including road, rail, aircraft, and marine vessels.
END-OF-COURSE OUTCOMES
After completing this course, students will know how to:
Apply safety rules involving the handling and transporting of hazardous materials as defined on the Hazardous Materials Table; and select the appropriate compliance strategies in the transport of dangerous and hazardous materials via road, rail, aircraft, or marine vessel.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
February 17-21 (Monday - Friday) 8:00 am – 5:00 pm
March 23-27 (Monday - Friday) 8:00 am – 5:00 pm
Explores the major safety issues that affect the work place, including general safety awareness, loss control and regulatory compliance.
END-OF-COURSE OUTCOMES
After completing this course, students will know how to:
Identify legal record keeping and components of the safety program for various industries as required.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
January 31 (Friday) 8:00 am – 5:00 pm
March 17 (Tuesday) 8:00 am – 5:00 pm
This class covers the basics of Hazwoper (29 CFR 1910.120) such as:
- Emergency response
- Chemical hazards
- PPE decontamination
- Monitoring
- Emergency action plan
This is the refresher class needed for continuing training required by the 24 and 40 hour Hazwoper.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
No SPRING 2020 Classes
This course covers industrial hygiene practices and related OSHA regulations and procedures. Course topics include recognition, evaluation and control of chemical, physical, biological and ergonomic hazards, Permissible Exposure Limits (PEL), OSHA health standards, respiratory protection, engineering controls, OSHA sampling protocols and strategies, and workplace health program elements. The course features workshops in health hazard recognition, OSHA health standards and use of sampling equipment. Upon course completion students will have the ability to recognize basic industrial hygiene principles and practices, identify characteristics of common air contaminants, locate PELs, perform basic industrial hygiene calculations, and determine methods for hazard control and abatement.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
February 20 (Thursday) 8:00 am - 5:00 pm
April 9 (Thursday) 8:00 am - 5:00 pm
This course addresses the following topics:
How to confidently address critical safety and health issues.
How to enhance safety responsibilities and safety management systems - including safety
inspections, incident investigations, safety meetings and employee engagement.
Identification and control of hazards, incident prevention, OSHA compliance and continuous
improvement in all areas of safety and health.
How to promote a positive safety culture.
Learning to support workers with on-going safety training, on-the-job training and
promoting safe behavior.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
No SPRING 2020 Classes
This eight-hour course covers OSHA standards for machine guarding, and introduces the multiple types of machinery, machine safeguards and related OSHA regulations and procedures.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
April 8 (Wednesday) 8:00 am – 5:00 pm
OSHA Standards, policies, and procedures in the construction industry. Topics include scope and application of the OSHA Construction Standards, construction safety and health principles, and special emphasis on those areas in construction which are most hazardous. Upon course completion, students will have the ability to define construction terms found in the OSHA Construction Standards, identify hazards which occur in the construction industry, locate and determine appropriate OSHA Construction Standards, policies and procedures, and describe the use of the OSHA Construction Standards and regulations to supplement an ongoing safety and health program.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
January 16 - 17 (Thursday - Friday) 8:00 am – 5:00 pm
February 10 - 11 (Monday - Tuesday) 8:00 am – 5:00 pm
April 23 - 24 (Thursday - Friday) 8:00 am – 5:00 pm
This course covers the following:
- Introduction to OSHA
- General duty clause
- Exit routes, emergency actions plans, fire prevention plans and fire prevention
- Flammable and combustible liquids
- Subpart D walking and working surfaces
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
January 27 - 30 (Monday - Thursday) 8:00 am – 5:00 pm
March 2 - 5 (Monday - Thursday) 8:00 am – 5:00 pm
May 11 - 14 (Monday - Thursday) 8:00 am – 5:00 pm
Develops an understanding of OSHA policies, procedures and standards as well as general industry safety and health principles covered in the OSHA standard part 1910.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
February 7 (Friday) 8:00 am - 5:00 pm
April 2 (Thursday) 8:00 am - 5:00 pm
May 28 (Thursday) 8:00 am - 5:00 pm
Employee orientation training that covers many of the safety related hazards in the workplace. This course is not meant to be a comprehensive safety training program however, it will provide a basic awareness of the topics covered.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
February 29 (Friday) 8:30 am - 12:30 pm
May 8 (Friday) 8:30 am - 12:30 pm
Employee orientation training that provides a refresher of many safety related hazards
in the workplace. This course is not meant to be a comprehensive safety training program
however, it will provide basic awareness of the topics covered.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
January 24 (Friday) 8:00 am - 5:00 pm
April 17 (Friday) 8:00 am - 5:00 pm
May 21 (Thursday) 8:00 am - 5:00 pm
Entrenamiento para empleados que abarca mayoría de los temas relacionados con los peligros y la seguridad del área de trabajo. Este curso no fue diseñado para ser un entrenamiento completo de seguridad per los temas que cubre proporcionan conocimiento de los temas básicos.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
February 28 (Friday) 8:00 am - 5:00 pm
April 17 (Friday) 8:00 am - 5:00 pm
Introducing: PEC Safe Supervisor, a safety-focused, one-day course to help lead new supervisors down the path of successful safety management. PEC Safe Supervisor gives current and potential safety leaders the foundational knowledge needed to perform at a supervisory level, taught by safety industry experts. The course examines exemplary leadership skills, the importance of a manager's safety-first attitude, and a supervisor's responsibilities to their team.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
March 5 - 6 (Thursday - Friday) 8:00 am – 5:00 pm
May 27 - 28 (Wednesday - Thursday) 8:00 am – 5:00 pm
The Supervisors’ Safety Development Program (SSDP) trains supervisors and managers to incorporate best safety practices into their daily management activities. A key feature of the program requires participants to demonstrate that they have acquired the knowledge and skills from training and are prepared to implement those skills in the workplace.
COURSE LOCATION
MC Advanced Technology Center
3200 W. Cuthbert
Midland, TX 79701
MAP
REGISTRATION CONTACT
Kristi Davis
(432) 681-6335
kdavis@midland.edu
MC Workforce CE Course Catalogs
Register for Risk Management Classes Now
CONTACT
KRISTI DAVIS
(432) 681-6335
 |
 |
 |